User Notes; General Notes; General - Nortel BSR252 Configuration - Basics

Chapter 4

User Notes

General Notes

There are some router functions that, although performing as expected, might
cause some confusion. These are summarized below.

General

1
When NAT Full Feature is first enabled, two address mapping rules are added to
the address mapping table. This is done to facilitate programming, and matches
the default SUA rule. The rules can be deleted.
2
When the wrong user ID or password is entered into the router login screen, no
error message is displayed. Instead, the login screen is simply displayed again.
3
The first address of the DHCP Address Pool is reserved for a BCM50 in the
subnet, and will not be assigned to any other equipment. Once assigned to a
BCM50, it is reserved for that BCM50, and will not be assigned to any other. If
the BCM50 is changed, the following command must be used to enable the router
to assign the first address to a different BCM50:
4
Default Address Mapping Rules When First Enable NAT Full Feature.
Response to Invalid User ID or Password
First DHCP Address Reserved for BCM50
ip dhcp enif0 server m50mac clear
Login Requires Reboot
Nortel Business Secure Router 252 Configuration — Basics
71