Range Configuration; Step Position With Transient Indication; Originator - ABB SPA-ZC 400 Installation And Commissioning Manual

SPA-ZC 400
11.2.1.4.
Table 11.2.1.4.-1 Range configuration
RangeConfig Type Definition
Attribute Name AttributeType
hhLim AnalogueValue
hLim AnalogueValue
ILim AnalogueValue
IILim AnalogueValue
min AnalogueValue
max AnalogueValue
11.2.1.5.
Table 11.2.1.5.-1 Step position with transient indication
ValWithTrans Type Definition
Attribute Name AttributeType
posVal INT8
transInd BOOLEAN
11.2.1.6.
Table 11.2.1.6.-1 Step position with transient indication
OriginatorType Definition
Attribute Name AttributeType
orCat ENUMERATED
orIdent OCTET STRING64
Table 11.2.1.6.-2 Values for orCat
Value
bay-control
station-control
remote-control
automatic-bay
78
Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual

Range configuration

Value/ Value Range

Step position with transient indication

Value/ Value Range
-64 ... 63

Originator

Value/ Value Range
not-supported | bay-
control | station-control
| remote-control |
automatic-bay |
automatic-station |
automatic-remote |
maintenance | process
M/O/C
M
M
M
M
M
M
M/O/C
M
O
M/O/C
M
M
Explanation
Control operation issued from an operator using a client
located at bay level
Control operation issued from an operator using a client
located at station level
Control operation from a remote operater outside the
substation (e.g. network control center)
Control operation issued from an automatic function at bay
level
1MRS755347
SPA-ZC 400/
Comments
Supported
Supported
Supported
Supported
Supported
Supported
SPA-ZC 400/
Comments
Supported
Not Supported
SPA-ZC 400/
Comments
Supported
Supported