Fig. 1 Conceptual picture of a typical system setup Introduction SPA-ZC 400 also enables ethernet access to an IED using the SPA over TCP/IP and Mod- SPA-ZC 400 enables connection of one bus over TCP/IP. REF 541/3/5, REM 543/5 or RET 541/3/5 device to the IEC 61850-8-1 Station bus.
Parts of SPA-ZC 400 Technical data Interfaces Optical fibres See fibre optic quides: SPA-ZC 400 - IED interface • SPA-ZF Optical glass fibres, multimode Fixed mechanics and fixed connectors for graded index type specifications, REF 541/543/545, REM 543/545 and 1MRS755371 RET 541/543/545 •...
Page 5
SPA / TCP 00-0C-02-B0-CC-00 POWER LINK DIAG SERVICE ETHERNET A040130b Fig. 3 SPA-ZC 400 dimensions Type Dimensions [mm] Weight [g] SPA-ZC 400 195 x 50 x 26 Tests and conditions Environmental tests and conditions Recommended service temperature range -10...+55°C (continuous) Transport and storage temperature range -40...+85°C according to the IEC 60068-2-48...
Ethernet Adapter SPA-ZC 400 1MRS755450 Technical data (cont´d) Electromagnetic compatibility tests EMC immunity test level meets the requirements listed below 1 MHz burst disturbance test, class III According to the IEC 60255-22-1 Common mode 2.5 kV Differential mode 1.0 kV...
Fig. 4 Ordering information for SPA-ZC400 SPA-ZC 400CD • SPA-ZC 400 Configuration CD: Order at least one SPA-ZC 400 configu- ration CD with your delivery to get the Com- - Communication Engineering Tool munication Engineering Tool for SPA-ZC40x (CET) for SPA-ZC40x and the Connectivity Packages.
Page 8
ABB Oy Distribution Automation P.O. Box 699 FI-65101 Vaasa, FINLAND Tel +358 10 22 11 Fax +358 10 224 1094 www.abb.com/substationautomation...