Uninstalling Communication Engineering Tool For Spa-Zc 40X; Installing Connectivity Packages - ABB SPA-ZC 400 Installation And Commissioning Manual

1MRS755347
5.2.3.
5.3.
Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
Uninstalling Communication Engineering Tool for
SPA-ZC 40x
1. Open the Add or Remove Programs dialog by selecting Start > Settings >
Control Panel > Add or Remove Programs.
2. Select Communication Engineering Tool (CET) for SPA-ZC 40x and click
Remove.
Uninstall CET for SPA-ZC 40xin order to install a new version
and to update the software. Uninstallation does not remove the
Microsoft SQL Server and .NET Framework. Removing these
programs can affect the functionality of the other ABB
applications.
Detailed instructions for upgrading the software are provided
when the upgrade is available.

Installing Connectivity Packages

1. Close all the open programs and insert the SPA-ZC 400 configuration CD
to the CD-ROM drive of your PC.
The Connectivity Packages can be downloaded on the ABB web
site (http://www.abb.com/substationautomation).
Contact ABB to check the connectivity package's status for the
Intelligent Electronic Device (IED) in question.
2. Double-click the Connectivity Package installation program and select the
relevant IED (.msi) to start the installation.
Install the Connectivity Package after installing the
Communication Engineering Tool (CET) for SPA-ZC 40x, see
Section 5.2.2. Installing Communication Engineering Tool for
SPA-ZC 40x. If this is not the case, re-install the Connectivity
Package after installing the CET for SPA-ZC 40x.
3. The installation wizard extracts the installation files to your local
computer.
SPA-ZC 400
25