Introduction maps the SPA protocol interface to the IEC 61850-8-1 standard. This enables connecting Using the SPA-ZC 402, an Intelligent Elec- products with optical SPA interface to IEC tronic Device (IED) with a fibre optic SPA 61850 based networks in both new and retro- bus can be connected to the Ethernet based fit installations.
110-220 VDC, 100-240 VAC POWER LINK DIAG ETHERNET Use M5 mounting screws A040027b Fig. 3 SPA-ZC 402 dimensions Type Dimensions [mm] Weight [g] SPA-ZC 402 190 x 115 x 35 Tests and conditions Environmental tests and conditions Recommended service temperature range -10...+55°C (continuous)
Vibration tests (sinusoidal) According to the IEC 60255-21-1, class I Shock and bumb test According to the IEC 60255-21-2, class I Auxiliary power supplies Type SPA-ZC 402 xxxA SPA-ZC 402 xxxC Input voltage AC 110/120/220/240 V Input voltage DC 110/125/220 V...
Ordering information for SPA-ZC402 SPA-ZC 402CD The connectivity packages for a set of • SPA-ZC 402 configuration CD ABB IEDs can be found from the internet • Communication Engineering Tool address: http://www.abb.com/substationauto- (CET) for SPA-ZC 40x. mation. Please contact ABB to check the con- nectivity package’s status for the IED in...
Page 8
ABB Oy Distribution Automation P.O. Box 699 FI-65101 Vaasa, FINLAND Tel +358 10 22 11 Fax +358 10 224 1094 www.abb.com/substationautomation...