Checking Connection To Spa-Zc 400 - ABB SPA-ZC 400 Installation And Commissioning Manual

SPA-ZC 400
5.4.2.
28
Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
To change the computer's IP address space to be the same as in SPA-ZC 400:
1. Open the Network Connections in Control Panel.
2. Type, for example, the following IP address to the IP address box:
192.168.2.1. See Fig. 5.4.1.-1.
You must have system administration rights to perform the task.
Fig. 5.4.1.-1 Changing IP address

Checking connection to SPA-ZC 400

Check the connection to SPA-ZC 400 by using the ping command:
1. Open the Run dialog.
2. Type cmd to the Open box, see Fig. 5.4.2.-1.
1MRS755347
A060241