Technical Reference; Acsi Conformance Statement - ABB SPA-ZC 400 Installation And Commissioning Manual

1MRS755347
11.
11.1.
Table 11.1.-1 ACSI basic conformance statement
Client-Server roles
B11 Server side (of TWO-
PARTY-
APPLICATION-
ASSOCIATION)
Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual

Technical reference

This chapter defines the compliance to IEC 61850 in terms of service,
modeling, engineering interfaces and also exceptions and local adaptations.
The information gives you a detailed explanation of the IEC 61850
capabilities of a product.
This chapter provides information about the following issues:

ACSI conformance statement

*
Model conformance statement
*
SCL conformance statement
*
SCL control block
*
Protocol implementation conformance statement
*
The ACSI conformance statement describes the abstract service interfaces,
which are normally mapped to specific communication service (SCSM) and
therefore indirectly stated in the protocol implementation conformance
statement. The conformance statements and documents are referred to as
Protocol Implementation Conformance Statement (PICS) and Model
Implementation Conformance Statement (MICS).Notations
For the following clauses, the following definitions apply:
Table 11.-1 Notations
M/m Mandatory support. The item must be implemented.
C/c Conditional support. The item must be implemented if the
stated condition exists.
O/o Optional support. The implementation may decide to
implement the item.
x The implementation must not implement this item (excluded).
i The implementation of the item is not within the scope of this
product (out-of-scope).
F/S Functional Standard. Should be applied.
Base Must be applied in any application claiming conformance to
this standard.
ACSI conformance statement
Client/ Subscriber
–
SPA-ZC 400
SPA-ZC 400/
Server/ Publisher
Comments
a Supported
75