Change Password - Siemens SENTRON PAC3200 Manual

Parameterize
9.2 Parameterizing the operator interface
To switch off password protection:
1. Call the "PASSWORD PROTECTION" display.
2. Deactivate the "PASSWORD PROTECTION" field with
F4
The device opens the "ENTER PASSWORD" dialog box.
3. Enter the password and confirm with
F4
The display returns to the "PASSWORD PROTECTION" display. The password is visible
on the display.
If you have given the correct password, password protection is switched off.
If you have given an incorrect password, password protection remains active. Start again at
Step 2 and enter the correct password.
Figure 9-25
(1)
(2)
9.2.12.5

Change password

The password can be changed whether access protection is on or off. If access protection is
switched on, the currently valid password is required in order to change the password.
Initial situation: Password protection switched off
If password protection is switched off, the password is also unprotected and can therefore be
changed without restriction.
152
Switch off password protection
Password accepted
Password rejected
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04