Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
2. To change the LAG settings, click on a LAG. The Figure 5-47 opens:
Figure 5-47
3. Modify the relevant fields.
4. Click
. The LAG is defined and the device is updated.
Configuring LACP
LAG ports can contain different media types if the ports are operating at the same speed.
Aggregated links can be set up manually or automatically established by enabling LACP on the
relevant links. Aggregate ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP Parameters Page contains fields for
configuring LACP LAGs.
Configuring The Device Using Your Browser
5-61
v1.0, November 2006
Advertisement
Table of Contents
