GS700TS Series Smart Switch Software User Manual
To define multicast groups:
1. Click Advanced > Multicast > Multicast Group.The Multicast Group Page opens:
Figure 5-89
The Multicast Group Page contains the following information:
•
Enable Bridge Multicast Filtering – Indicate if bridge multicast filtering is enabled on
the device. The possible field values are:
–
Checked – Enables multicast filtering on the device.
–
Unchecked – Disables multicast filtering on the device. If multicast filtering is
disabled, multicast frames are flooded to all ports in the relevant VLAN. Disabled is
the default value.
•
VLAN ID – Identifies a VLAN and contains information about the multicast group
address.
•
VLAN Name – Displays the user defined VLAN name.
•
Bridge Multicast Address – Identifies the multicast group MAC address/IP address.
•
Delete – The possible field values are:
5-122
Configuring The Device Using Your Browser
v1.0, November 2006