Resetting the Factory Default Values
The Factory Reset Page allows network managers to reset the device to the factory defaults
shipped with the switch. Restoring factory defaults results in erasing the configuration file. The
stacking defaults are not restored from this page, including:
•
The stacking mode
•
The stacking cables
•
The Unit ID numbering
To restore stacking defaults, press the Factory Default button on the front panel of your device. To
reset the factory defaults:
1. Click Factory Reset. The Factory Reset Page opens:
Figure 5-109
2. Click
set.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
. The device reboots and the original default values are
v1.0, November 2006
5-151