NETGEAR ProSafe GS700TS User Manual page 130

3. Define the relevant fields.
4. Click . The SNMP user is defined and the device is updated.
To modify a SNMP group:
1. Click Advanced > SNMP > Users. The SNMP Users Page opens.
2. Select a SNMP group. The Modify Users Page opens:
Figure 5-72
3. Modify the relevant fields.
4. Click . The SNMP user is defined and the device is updated.
Defining SNMP Groups
The Groups Page provides information for creating SNMP groups and assigning SNMP access
control privileges to SNMP groups. Groups allow network managers to assign access rights to
specific device features or feature aspects.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-101