Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
–
All Ports of Unit No. – Indicates the ports of the unit.
–
Port No. – Indicates the port number.
•
Admin Status – Indicates whether the port is currently operational or non-operational.
The possible field values are:
–
Up – Indicates the port is currently operating.
–
Down – Indicates the port is currently not operating.
•
Reactivate Suspended Port – Reactivates a port if the port has been disabled through the
locked port security option. The possible field values are:
–
Checked – Returns a suspended port to active status.
–
Unchecked – The suspended port status remains unchanged.
•
Operational Status – Indicates the port operational status. Possible field values are:
–
Suspended – The port is currently active, and is currently not receiving or transmitting
traffic.
–
Active – The port is currently active and is currently receiving and transmitting traffic.
–
Disable – The port is currently disabled, and is not currently receiving or transmitting
traffic.
•
Admin Speed – Displays the configured rate for the port. The port type determines what
speed setting options are available. Port speeds can only be configured when auto
negotiation is disabled. The possible field values are:
–
10M – Indicates the port is currently operating at 10 Mbps.
–
100M – Indicates the port is currently operating at 100 Mbps.
–
1000M – Indicates the port is currently operating at 1000 Mbps.
•
Current Port Speed – Indicates the current port speed.
•
Admin Duplex – Displays the port duplex mode. This field is configurable only when
auto negotiation is disabled, and the port speed is set to 10M or 100M. This field cannot be
configured on LAGs. The possible field values are:
–
Full – The interface supports transmission between the device and its link partner in
both directions simultaneously.
–
Half – The interface supports transmission between the device and the client in only
one direction at a time.
•
Current Duplex Mode – Indicates the current duplex mode.
5-52
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
