•
Interface – Displays the interface for which the global QoS parameters are defined.
–
Port – Selects the port for which the global QoS parameters are defined.
–
LAG – Selects the LAG for which the global QoS parameters are defined.
•
Default CoS – Determines the default CoS value for incoming packets for which a VLAN
tag is not defined.
•
Restore Defaults – Restores the factory CoS default settings to the selected port.
–
Checked – Restores the factory CoS default settings to the ports.
–
Unchecked– Maintains the current CoS settings.
2. Define the relevant fields.
3. Click
. Quality of Service is enabled on the device.
To modify QoS:
1. Click QoS > General > CoS. The CoS Page opens.
2. Click an interface. The Modify Port Priority Page opens:
Figure 5-63
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-87