GS700TS Series Smart Switch Software User Manual
Configuring Static Addresses
To configure the static addresses:
1. Click Address Table > Static Addresses. The Static Addresses Page opens:
Figure 5-56
The Static Addresses Page contains the following fields:
•
ID – Indicates the stacking number.
•
VLAN ID – Displays the VLAN ID number to which the entry refers.
•
MAC Address – Displays the MAC address to which the entry refers.
•
Interface – Displays the interface to which the entry refers.
•
Status – Displays how the entry was created. The possible field values are:
–
Secure – The MAC Address is defined for locked ports.
–
Permanent – The MAC address is permanent and is never deleted.
–
Delete on Reset – The MAC address is deleted when the device is reset.
5-74
Configuring The Device Using Your Browser
v1.0, November 2006