This section walks you through the steps to start managing your GS700TS switch. This section
covers how to get started in a network with a DHCP server (most common) as well as if you do not
have a DHCP server.
Network with DHCP Server
1. Connect the GS700TS switch to a DHCP network.
2. Power on the GS700TS switch by plugging in power cord.
3. Install the Smartwizard Discovery program on your computer.
Start Smartwizard Discovery (Chapter 3 contains detailed instructions on the Smartwizard
Discovery).
4. Click Discover to enable the Smartwizard Discovery to find your GS700TS switch, see
Figure 2-1.
Getting Started
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
Chapter 2
Getting Started
2-1