Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
•
Drop Events – Displays the number of dropped events that have occurred on the interface
since the device was last refreshed.
•
Received Bytes (Octets) – Displays the number of octets received on the interface since
the device was last refreshed. This number includes bad packets and FCS octets, but
excludes framing bits.
•
Received Packets – Displays the number of packets received on the interface, including
bad packets, Multicast, and Broadcast packets, since the device was last refreshed.
•
Broadcast Packets Received – Displays the number of good broadcast packets received
on the interface since the device was last refreshed. This number does not include
Multicast packets.
•
Multicast Packets Received – Displays the number of good Multicast packets received
on the interface since the device was last refreshed.
•
CRC & Align Errors – Displays the number of CRC and Align errors that have occurred
on the interface since the device was last refreshed.
•
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
•
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
•
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
•
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
•
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
•
Frames of xx Bytes – Number of xx-byte frames received on the interface since the
device was last refreshed.
2. Select an interface in the Interface field. The RMON statistics are displayed.
5-136
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
