Table of Contents
Advertisement
2. Click
Figure 5-29
3. Define the relevant fields.
4. Click
. The MAC based ACL is defined, and the device is updated.
5. To add a rule, click
The Add MAC Based Rule page contains the following fields:
•
ACL Name – Displays the user-defined MAC based ACLs.
•
New Rule Priority – Indicates the rule priority, which determines which rule is matched
to a packet on a firstmatch basis.
•
Source MAC Address – Matches the source MAC IP address to which packets are
addressed to the ACE.
•
Action – In addition, the port can be shut down, a trap can be sent to the network
administrator, or packet is assigned rate limiting restrictions for forwarding. The options
are as follows:
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
. The Add MAC Based ACL Page opens:
. The Add MAC Based ACL page opens.
v1.0, November 2006
5-31
Advertisement
Table of Contents
