GS700TS Series Smart Switch Software User Manual
–
All Ports of Unit No. – Indicates the ports of the unit from which storm control is
enabled.
–
Port No. – Indicates the port number.
3. Modify the relevant fields.
4. Click
. Storm control is enabled on the device.
ACL Overview
Access Control Lists (ACL) allow network managers to define classification actions and rules for
specific ingress ports. Packets entering an ingress port, with an active ACL, are either admitted or
denied entry and the ingress port is disabled. If they are denied entry, the user can disable the port.
To implement ACLs, first define the ACL to specify what actions should be taken when packets
are received and then specify which ports should follow these actions by binding the ACL to them.
Defining MAC Based Access Control Lists
Access Control Lists are made up of a list of Access Control Elements. An Access Control
Element specifies an action to apply when a packet is received from a specific MAC address or
range of MAC addresses.
The MAC Based ACL Page page allows a MAC-based ACL to be defined. ACEs can be added
only if the ACL is not bound to an interface.
5-28
Configuring The Device Using Your Browser
v1.0, November 2006