Table of Contents
Advertisement
–
100 Half – Indicates that the port advertises for a 100 mbps speed port and half duplex
mode setting.
–
100 Full – Indicates that the port advertises for a 100 mbps speed port and full duplex
mode setting.
–
1000 Full – Indicates that the port advertises for a 1000 mbps speed port and full
duplex mode setting.
•
Current Advertisement – The port advertises its speed to its neighbor port to start the
negotiation process. The possible field values are those specified in the Admin
Advertisement field.
•
Neighbor Advertisement – Indicates the neighboring port's advertisement settings. The
field values are identical to the Admin Advertisement field values.
•
Current Back Pressure – Indicates the current back pressure mode on the port.
•
Current Flow Control – Indicates the current flow control status on the port.
•
Unit No. – Indicates the unit number. Possible values are 1-6.
•
Port – Indicates the port number.
3. Define the relevant fields.
4. Select the ports to be assigned to the LAG.
5. Click
. The LAG membership settings are saved and the device is updated.
Viewing LAG Membership
The LAG Membership Page presents which ports are assigned to each LAG.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-59
Advertisement
Table of Contents
