Main Screen > Switch Setting > Firmware Upgrade
1. Click Firmware Upgrade from the Switch Settings section. The following screen opens.
Figure 3-11
•
Firmware Path – The location of the new firmware. If you do not know the location, you
can click Browse to locate file.
•
Password – The default password is 'password'.
•
Upgrade State – Shows upgrading in progress.
2. Click Start Upgrade to start upgrading.
Main Screen > Switch Setting > Exit
Click Exit from the Switch Setting section to close the Smartwizard Discovery program.
Smartwizard Discovery Program
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
3-7