Table of Contents
Advertisement
2. Click a LAG. The Modify LAG Settings Page opens:
Figure 5-45
In addition to the fields in the LAG Settings Page, the Modify LAG Settings Page contains the
following additional fields:
•
LAG Name – Displays the user-defined Lag name.
•
LACP – Enables LACP on the LAG.
ports together in a LAG.
•
Admin Status – Indicates whether the port is currently operational or non-operational.
The possible field values are:
–
Up – Indicates the port is currently operating.
–
Down – Indicates the port is currently not operating.
•
Reactivate Suspended Port – Reactivates a port if the port has been disabled through the
locked port security option. The possible field values are:
–
Checked – Returns a suspended port to active status.
–
Unchecked – The suspended port status remains unchanged.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
Link Aggregation Control Protocol automatically bundles
v1.0, November 2006
5-57
Advertisement
Table of Contents
