GS700TS Series Smart Switch Software User Manual
Configuring Multicast Forward All
The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that
is attached to a neighboring multicast router/switch. Once IGMP Snooping is enabled, multicast
packets are forwarded to the appropriate port or VLAN. Unless LAGs are defined, only a
Multicast Forward All table displays.
To define Multicast forward all settings:
1. Click Advanced > Multicast > Multicast Forward All. The Multicast Forward All Page
opens:
Figure 5-91
The Multicast Forward All Page contains the following fields:
•
VLAN ID – Displays the VLAN for which multicast parameters are displayed.
•
VLAN Name – Displays the user defined VLAN name.
•
Ports of Unit – Displays ports that can be added to a multicast service.
5-124
Configuring The Device Using Your Browser
v1.0, November 2006