Table of Contents
Advertisement
To modify IGMP Snooping:
1. Click Advanced > Multicast > IGMP Snooping. The IGMP Snooping Configuration Page
opens.
2. Select a VLAN. The IGMP Snooping Configuration Page opens:
Figure 5-88
3. Modify the relevant fields.
4. Click
. The IGMP Snooping is defined and the device is updated.
Defining Multicast Groups
The Multicast Group Page displays the ports and LAGs attached to the multicast service group in
the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or
LAGs joined the multicast group. Ports can be added either to existing groups or to new multicast
service groups. The Multicast Group Page permits new multicast service groups to be created. The
Multicast Group Page also assigns ports to a specific multicast service address group.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-121
Advertisement
Table of Contents
