Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
To view the Dynamic MAC Address Table:
1. Click Address Table > Dynamic Addresses. The Dynamic Addresses Page opens:
Figure 5-59
The Dynamic Addresses Page contains the following fields:
•
Address Aging – Specifies the amount of time the MAC address remains in the Dynamic
MAC Address table before it is timed out if no traffic from the source is detected. The
default value is 300 seconds.
•
Clear Table – Removes the current values from the table.
•
Interface – Specifies the interface for which the table is queried. There are two interface
types from which to select.
–
Port – Indicates the Port for which the table is currently queried
–
LAG – Indicates the LAG for which the table is currently queried
•
MAC Address – Specifies the MAC address for which the table is queried.
•
VLAN ID – Specifies the VLAN ID for which the table is queried.
5-78
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
