Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
–
Delta – Subtracts the last sampled value from the current value. The difference in the
values is compared to the threshold.
–
Absolute – Compares the values directly with the thresholds at the end of the sampling
interval.
•
Rising Threshold – Displays the rising counter value that triggers the rising threshold
alarm. The rising threshold is presented on top of the graph bars. Each monitored variable
is designated a color.
•
Rising Event – Displays the mechanism in which the alarms are reported. The possible
field values are:
–
LOG – Indicates there is not a saving mechanism for either the device or in the
management system. If the device is not reset, the entry remains in the Log Table.
–
TRAP – Indicates that an SNMP trap is generated and sent via the Trap mechanism.
The Trap can also be saved using the Trap mechanism.
–
Both – Indicates that both the Log and Trap mechanism are used to report alarms.
•
Falling Threshold – Displays the falling counter value that triggers the falling threshold
alarm. The falling threshold is graphically presented on top of the graph bars. Each
monitored variable is designated a color.
•
Falling Event – Displays the mechanism in which the alarms are reported.
•
Startup Alarm – Displays the trigger that activates the alarm generation. Rising is
defined by crossing the threshold from a low-value threshold to a higher-value threshold.
•
Interval (sec) – Defines the alarm interval time in seconds.
•
Owner – Displays the device or user that defined the alarm.
•
Delete – Removes the RMON Alarms Table entry.
5-148
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
