Configuring Interfaces; Defining Port Parameters - NETGEAR ProSafe GS700TS User Manual

4. Click . The log is defined and the device is updated.

Configuring Interfaces

This section contains information for configuring ports and contains the following topic:
•

Defining Port Parameters

• Defining LAG Members
Defining Port Parameters
The Port Configuration Page contains fields for defining port parameters.
To define port parameters:
1. Click Port Configuration. The Port Configuration Page opens:
Figure 5-42
The Port Configuration Page contains the following fields:
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-49