Table of Contents
Advertisement
To enable IGMP Snooping:
1. Click Advanced > Multicast > IGMP Snooping. The IGMP Snooping Page opens:
Figure 5-87
The IGMP Snooping Page contains the following fields:
•
Enable IGMP Snooping Status – Indicates if IGMP Snooping is enabled on the device.
IGMP Snooping can be enabled only if Bridge Multicast Filtering is enabled. The possible
field values are:
–
Checked – Enables IGMP Snooping on the device.
–
Unchecked – Disables IGMP Snooping on the device.
•
VLAN ID – Specifies the VLAN ID.
•
IGMP Snooping Status – Indicates if IGMP snooping is enabled on the VLAN. The
possible field values are:
–
Enabled – Enables IGMP Snooping on the VLAN.
–
Disabled – Disables IGMP Snooping on the VLAN.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-119
Advertisement
Table of Contents
