Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
The CoS to Queue Page contains the following fields:
•
Class of Service – Specifies the CoS priority tag values, where 0 is the lowest and 7 is the
highest.
•
Queue – Defines the traffic forwarding queue to which the CoS priority is mapped. Four
traffic priority queues are supported. The lowest priority is 1 and is the highest is 4.
•
Restore Defaults – Restores the device factory defaults for mapping CoS values to a
forwarding queue.
2. Define the relevant fields.
3. Click
. The CoS value is mapped to a queue and the device is updated.
Mapping DSCP Values to Queues
The DSCP to Queue Page contains fields for mapping DSCP settings to traffic queues. For
example, a packet with a DSCP tag value of 3 can be assigned to queue 2.
5-94
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
