GS700TS Series Smart Switch Software User Manual
Network without DHCP Server
A static IP address can be assigned to the GS700TS device even if the network does not have a
DHCP server.
1. Connect the GS700TS switch to your existing network.
2. Power on the GS700TS switch by plugging in the power cord. The default IP is 192.168.0.239.
3. Install the Smartwizard Discovery program on your computer.
Start Smartwizard Discovery (Chapter 3 has detailed instructions on the Smartwizard
Discovery).
4. Click Discover to enable the Smartwizard Discovery to find your GS700TS switch.
5. Click Configuration Setting (See Figure 2-3).
Figure 2-3
6. Choose Disable on DHCP. See Figure 2-4.
7. Enter your static IP address, Gateway and Subnet, and then type your password and click Set.
Please make sure your PC and GS700TS switch are in the same subnet (See Figure 2-5).
2-4
v1.0, November 2006
Getting Started