Lacp Configuration; Lacp Port Configuration - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
6. To view the ports that are members of the selected LAG, click the CURRENT MEMBERS
button.

LACP Configuration

To configure LACP:

1. Select Switching
The following screen displays:
2. In the LACP System Priority field, specify the device's link aggregation priority relative to the
devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter
globally by specifying a priority from 1 to 65535. The default value is 32768.
3. Click APPLY to send the updated configuration to the switch.
Configuration changes take effect immediately.

LACP Port Configuration

To configure LACP port priority settings:

1. Select Switching
LAG Advanced LACP Configuration.
  
LAG Advanced LACP Port Configuration.
  
Configuring Switching Information
80