To open the Stack Management Page:
1. Click Stack Management. The Stack Management Page opens.
Figure 5-21
The Stack Management Page contains the following fields:
•
Master Election – When the stack is powered up and completes the boot-up process, the
Master unit is elected within 0.5 seconds. The possible field values are:
–
Automatically – The master is selected automatically by software.
–
Force Master – Enables forcing the selection of a Stack Master.
•
Unit No. – Indicates the stacking member's current number. Possible values are 1-6.
•
Unit No. After Reset – Indicates the stacking member's future number after the stack is
reset. Possible values are 1-6 or auto (automatically selected).
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-17