Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
Trap Filter Settings
The Trap Filter Settings Page permits filtering traps based on OIDs. Each OID is linked to a
device feature or a portion of a feature. The Trap Filter Settings Page also allows network
managers to filter notifications.
To define SNMP Trap Filter settings:
1. Click Advanced > SNMP > Trap Filter Settings. The Trap Filter Settings Page opens:
Figure 5-85
The Trap Filter Settings Page contains the following fields:
•
Filter Name – Contains a list of user-defined notification filters.
•
ID – Indicates the Trap Filter Settings Table entry number.
•
Object Identifier Subtree – Displays the OID for which notifications are sent or blocked.
If a filter is attached to an OID, traps or informs are generated and sent to the trap
recipients. OIDs are selected from either the Select from field or the Object ID field.
•
Filter Type – Indicates whether to send traps or informs relating to the selected OID.
–
Excluded – Does not send traps or informs.
5-116
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
