The Bandwidth Page contains the following fields:
•
Unit No. – Indicated the unit number.
•
Interface – Indicates the stacking members for which the bandwidth settings are
displayed.
•
Ingress Rate Limit Status – Determines the ingress port bandwidth settings for the
selected interface.
–
Rate Limit – Defines the interface rate limiting to kilobits per second. The field range
is 3500 - 1,000,000 Kbps.
•
Egress Shaping Rate on Selected Port – Determines the egress port bandwidth settings
for the selected interface. The possible field values are:
–
Committed Information Rate (CIR) – Defines the CIR. The field range is 62 -
1,000,000.
–
Committed Burst Size (CBS) – Defines the CBS. The field range is 64 -1,000,000.
•
Delete – Deletes the bandwidth settings from the interface. The possible field values are:
–
Checked – Deletes the bandwidth settings from the selected interface.
–
Unchecked – Maintains the bandwidth settings from the selected interface. This is the
default value.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-91