GS700TS Series Smart Switch Software User Manual
To enable QoS:
1. Click QoS > General > CoS. The CoS Page opens:
Figure 5-62
The CoS Page contains the following:
•
CoS Mode – Determines whether QoS is enabled on the device. The possible field values
are:
–
Enable – Enables QoS on the device.
–
Disable – Disables QoS on the device.
•
Trust Mode – Defines which packet fields to use for classifying packets entering the
device. When no rules are defined, the traffic containing the predefined packet CoS field is
mapped according to the relevant trust modes table. Traffic not containing a predefined
packet field is mapped to best effort. The possible Trust Mode field values are:
–
CoS – Classifies traffic based on the CoS (VPT) tag value.
–
DSCP – Classifies traffic based on the DSCP tag value.
•
Unit No. – Displays the stacking member for which the QoS information is displayed.
5-86
Configuring The Device Using Your Browser
v1.0, November 2006