GS700TS Series Smart Switch Software User Manual
To enable port mirroring:
1. Click Monitor > Port Mirroring. The Port Mirroring Page opens:
Figure 5-94
The Port Mirroring Page contains the following fields:
•
Unit No. – Indicates the stacking number.
•
Destination Port – Defines the port number to which port traffic is copied.
•
Source Port – Indicates the port from which the packets are mirrored.
•
Type – Indicates the port mode configuration for port mirroring. The possible field values
are:
–
Rx – Copies traffic received by the port.
–
Tx – Copies traffic transmitted by the port.
–
Tx and Rx – Copies traffic both transmitted and received by the port. This is the
default value.
•
Status – Indicates if the port is currently monitored. The possible field values are:
5-130
Configuring The Device Using Your Browser
v1.0, November 2006