Table of Contents
Advertisement
GS700TS Series Smart Switch Software User Manual
To define an SNMP group:
1. Click Advanced > SNMP > Groups. The Groups Page opens:
Figure 5-73
The Groups Page contains the following fields:
•
ID – Indicates the stacking number.
•
Group Name – Displays the user-defined group to which access control rules are applied.
The field range is up to 30 characters.
•
Security Model – Defines the SNMP version attached to the group. The possible field
values are:
–
SNMPv1 – SNMPv1 is defined for the group.
–
SNMPv2c – SNMPv2c is defined for the group.
–
SNMPv3 – SNMPv3 is defined for the group.
•
Security Level – Defines the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
5-102
Configuring The Device Using Your Browser
v1.0, November 2006
Advertisement
Table of Contents
