Logs Configuration
The Logs Configuration Page contains fields for defining which events are recorded to which logs.
It contains fields for enabling logs globally, and parameters for defining logs. Log messages are
listed from the highest severity to the lowest severity level. When a severity level is selected, all
severity level choices above the selection are selected automatically.
To enable event logging:
1. Click Logs > Logs Configuration. The Logs Configuration Page opens.
Figure 5-37
The Logs Configuration Page contains the following fields:
•
Enable Logging – Indicates if device global logs for Cache, File, and Server Logs are
enabled. Console logs are enabled by default. The possible field values are:
–
Checked – Enables device logs.
–
Unchecked – Disables device logs.
•
Severity – The following are the available RAM Logs and Log File severity levels:
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-43