GS700TS Series Smart Switch Software User Manual
2. Click
. The Add Views Page opens:
Figure 5-77
3. Define the relevant fields.
4. Click
. The view is defined and the device is updated.
Defining SNMP Communities
Access rights are managed by defining communities in the SNMP Communities Page. When the
community names are changed, access rights are also changed. SNMP communities are defined
only for SNMP v1 and SNMP v2c.
The Communities Page is divided into the following tables:
•
SNMP Communities Basic Table. The SNMP Communities Basic Table contains the
following fields when using SNMPv1 and SNMPv3:
–
ID – Indicates the table entry number.
–
Management Station – Displays the management station IP address for which the basic
SNMP community is defined.
5-106
Configuring The Device Using Your Browser
v1.0, November 2006