Table of Contents
Advertisement
To set the queue settings:
1. Click QoS > General > Queue. The Queue Page opens:
Figure 5-64
The Queue Page contains the following fields:
•
Strict Priority – Specifies whether traffic scheduling is based strictly on the queue
priority.
•
WRR – Assigns WRR weights to queues to prevent a specific application from
consuming all of a port's forwarding capability. The queue weights are preconfigured and
are set to 0,2,4, and 7.
2. Define the relevant fields.
3. Click
. The queue settings are set and the device is updated.
Configuring The Device Using Your Browser
GS700TS Series Smart Switch Software User Manual
v1.0, November 2006
5-89
Advertisement
Table of Contents
