GS700TS Series Smart Switch Software User Manual
2. Click an interface. The Modify Bandwidth Page opens:
Figure 5-66
In addition to the Bandwidth Page, the Modify Bandwidth Page has the following fields:
•
Interface – Displays the port or LAG name. The possible field values are:
–
Port No. – Indicates the port number.
–
LAG No. – Indicates the LAG number.
•
Egress Shaping Rate on Selected Port – Indicates if rate limiting is enabled on the
interface. The possible field values are:
–
Enable – Enables engress rate limiting on the interface.
–
Disable – Disables engress rate limiting on the interface.
•
Committed Information Rate (CIR) – Defines CIR as the queue shaping type.
•
Committed Burst Size (CbS) – Defines CBS as the queue shaping type.
•
Ingress Rate Limit Status – Indicates if rate limiting is defined on the interface. The
possible field values are:
5-92
Configuring The Device Using Your Browser
v1.0, November 2006