GS700TS Series Smart Switch Software User Manual
By double-clicking a listed switch, you can open the Web management for that switch.
Alternatively, you can select a switch by clicking on it once, and then clicking Web Access. For
more information on Web management, see Chapter 5.
Main Screen > Switch Setting > Configuration Setting
Select a switch by clicking on it. Then click Configuration Setting. The following screen pops up
and displays the Product Name and MAC Address. From this screen, you can modify the
following:
•
IP Address – Displays the currently configured IP address.
•
Subnet Mask – Displays the currently configured Subnet Mask.
•
Gateway – Displays the currently configured Gateway.
•
System Name – Provides a user-defined system name field. The System Name field helps you
keep track of your switches. It can be any combination of letters and/or numbers.
•
Location – Provides a user-defined field to help you keep track of where this switch is. It can
be any combination of letters and/or numbers.
•
DHCP – DHCP automatically obtains the IP information for the switch.
Figure 3-9
3-4
v1.0, November 2006
Smartwizard Discovery Program