Configuring Interfaces - NETGEAR FS728TS User Manual

Configuring Interfaces

This section contains information for configuring ports, LAGs, and VLANs and contains the following topics:
•
Defining Port Parameters
•
Defining LAG Members
•
Defining VLAN Properties
Defining Port Parameters
The Port Configuration Page contains fields for defining port parameters.
To define port parameters:
1. Click Port Configuration. The Port Configuration Page opens.
The Port Configuration Page contains the following fields:
•
Unit No. — Indicates the stacking number or LAG number.
•
Interface — Displays the port number.
•
Port Description — Provides a user-defined device description.
•
Link Status — Indicates whether the port is currently operational or non-operational. The possible field values are:
Up — Indicates the port is currently operating.
–
Down — Indicates the port is currently not operating.
–
•
Port Speed — Displays the configured rate for the port. The port type determines which speed setting options are available. Port speeds can
only be configured when auto negotiation is disabled. The possible field values are:
Figure 5 - 24: Port Configuration Page
Page 55