Balance Shaft Removal / Inspection - Polaris RZR 900 2017 Service Manual

ENGINE / COOLING SYSTEM
16. Remove the eight M10
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
3.108
k l
, two M8 and one M6
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
j

BALANCE SHAFT REMOVAL / INSPECTION

1. Perform Crankcase Disassembly / Inspection page
3.106 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
w
and remove it
© Copyright Polaris Industries Inc.