Doors; Door Panel / Latch Replacement; Door Adjustment - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

BODY / FRAME

DOORS

1. Remove the T-25 fasteners retaining the door panel

to the door frame. Remove the door panel.

2. Remove the two fasteners

to the door frame.

3. Install new latch onto the door frame. Torque

mounting fasteners to specification.

Door Latch Fasteners:

8 ft-lb (11 Nm)

4. Install the door panel onto the door frame. Torque

fasteners to specification.

Door Panel Fasteners:

22 in-lb (2 Nm)

5. Adjust the door so it properly opens and latches.

Refer to Door Adjustment page

retaining the door latch

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

The non-S models will have a straight door with only

one adjuster at the top and two on the bottom. The

same adjustment procedure applies.

1. Remove the fasteners retaining the door panel and

remove the door panel.

2. Close the door and keep it closed during entire

adjustment for proper functional fit.

3. Loosen the M8 bolts

the hinge brackets using a T-40 Torx driver.

holding the door assembly to

Table of Contents