Polaris RZR 900 2017 Service Manual page 556

BODY / FRAME
1. Remove seats and rocker panels (Refer to Rocker
Panel / Console / Floor page 11.20).
2. Remove four Torx T40 screws
w
retaining the front console to the floor.
3. Remove shift handle knob and remove the front
console.
4. Remove the Torx T40 screws
retaining the rear console to the rear floor.
5. Remove the rear console.
6. Remove two M10x1.25x20 bolts from the rear seat
t
frame and two M10x1.50x55
seat frame assembly.
7. Remove the seat frame.
11.24
q
and five push rivets
e r
and push rivets
y
bolts from the rear
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
8. Disconnect negative and positive battery cables.
Remove the battery.
9. Remove two fasteners retaining the fuse panel to the
lower rear close off panel.
10. Remove two fasteners retaining the voltage regulator
to the back of the lower rear close off panel.
11. Remove two Torx T40 screws
i
retaining the lower rear close off panel.
12. Remove four Torx T40 screws
rear close off panel. Remove the upper close off
panel.
u
and four push rivets
o
retaining the upper
© Copyright Polaris Industries Inc.