Driven Clutch Assembly - Polaris RZR 900 2017 Service Manual

t
10. Check the rollers for wear. If rollers are worn, a
new driven clutch assembly may be needed if there is
damage to the helix.
11. If roller need replacement, remove the E-clip
u
washer retaining each roller.
12. Inspect driven clutch sheave faces for wear or
damage.
13. Clean and inspect the helix and transmission input
shaft splines.
14. Lube splines with a light film of grease. Do not
lubricate the bearings!
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.

DRIVEN CLUTCH ASSEMBLY

q
1. Align the X's
sheaves.
y
and
2. Install the square sliders
3. Install the spring pins
PVT SYSTEM
on the moveable and stationary
w e
and slider pins .
r
to retain the slider pins.
6
6.31