Polaris RZR 900 2017 Service Manual page 363

10. Separate the stationary sheave from the moveable
a
sheave. Note the X's on the stationary and fixed
sheaves for reassembly.
11. Inspect the clutch bushings for wear. If there is heavy
wear on the bushings, replace the clutch assembly.
12. Inspect the sheaves for excessive wear or damage.
DRIVEN CLUTCH ASSEMBLY
q
1. Align the X's on the moveable and stationary
sheaves.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
w
2. Install the square sliders
r
3. Install the spring pins to retain the slider pins.
4. If removed, install the rollers
u
clips onto the spider.
PVT SYSTEM
e
and slider pins .
6
t y
, washers and E-
6.27