Polaris RZR 900 2017 Service Manual page 494

Hide thumbs Also See for RZR 900 2017:

Table of Contents

STEERING / SUSPENSION

8. Using a 1" open-end wrench or adjustable wrench,

loosen and remove the bearing cap from the shock

9. Slowly lift up and remove the shock rod assembly

from the shock body.

10. Remove and properly dispose of the oil from the

Insert the IFP Tool (PS-45908) and cycle the Internal

Floating Piston (IFP) a few times to purge the shock oil

11. Remove the floating piston from the shock reservoir

using the IFP Tool (PS-45908).

12. Clean and inspect ALL parts and replace as needed.

Seal kits are available and should be installed at this

time if seals or O-rings are damaged or worn.

13. Use the appropriate shock rod holding tool and a

vise to mount the shock rod vertically with the

threaded end upward.

Front Shock Rod Holding Tool: 2872429

Rear Shock Rod Holding Tool: PU-50931

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

from the reservoir.

Chapters

Table of Contents