Water Pump Housing Removal - Polaris RZR 900 2017 Service Manual

WATER PUMP HOUSING REMOVAL

NOTICE
The water pump housing can be serviced with the
engine installed in the chassis (see Chapter 3 – Water
Pump Removal page
1. Remove the coolant lines from the thermostat
housing, cylinder inlet and oil cooler. Leave them all
attached to the water pump housing.
2. Remove the three long gold colored bolts
retaining the water pump housing to the engine.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
3. Remove the water pump assembly from the engine
by using a twisting motion as you pull out on the
housing.
).
4. If water pump service is required (impeller or
mechanical seal), refer to Water Pump Service
page
q
ENGINE / COOLING SYSTEM
.
3
3.103